Characteristics the Marshall Test Subsitutution of Polypropylene Plastic Pellets as Filler in Mixture Asphalt Concrete Binder Course (AC BC)

Asri Mulyadi; Asrullah Asrullah; Rita  Anggrainy; Irawan Irawan; Choirul  Rizal

doi:10.47006/ijierm.v5i2.234

Asri Mulyadi Faculty of Engineering, University of Palembang, Indonesia
Asrullah Asrullah Faculty of Engineering, University of Palembang, Indonesia
Rita Anggrainy Faculty of Engineering, University of Palembang, Indonesia
Irawan Irawan Faculty of Engineering, University of Palembang, Indonesia
Choirul Rizal Faculty of Engineering, University of Palembang, Indonesia

DOI: https://doi.org/10.47006/ijierm.v5i2.234

Keywords: Marshall test, Polypropylene, Filler, VMA,VIM,VFA,Flow, MQ, AC BC

Abstract

This research was carried out on a laboratory experimental scale, with the aim of determining the characteristics of the Marshall test for the substitution of Polypropylene plastic pellets in the Asphalt Concrete Binder Course (AC BC) mixture. The substitution of Polypropylene plastic pellets in AC BC mixture is 1%, 2%, 3% of the weight of filler in AC BC standard mixture. From the test results, it can be concluded that the characteristics of the marshall test include VMA values, VIM values, VFA values, stability values, flow values, MQ values that meet the predetermined requirements both without filler and with filler.